HIGH PROFILE CABIN CRUISERS W/ RADAR ARCH BOAT COVER (Haze Grey)

(No reviews yet) Write a Review
$1,072.11 - $1,270.07
SKU:
HPCRA-24-32
Shipping:
$25.00 (Fixed Shipping Cost)

Product Overview

Protect your investment. Boater's Outlet has a variety of Boat Covers IN STOCK to help protect your boat!

Features

  • Hook and loop cut out for radar arch and standard biminis
  • Sewn in snap pads to be used with our boat cover support pole (not included)
  • 2 rope ratchets for tightening the draw rope in the hem of the cover
  • Cover will accommodate for up to 30” bow rails.
  • Cut out for anchor roller

Velcro® Slot Measurements

  • A — Length from tip of nose to where the slot for the arch will begin
  • B — Length of sleeve which allows the arch to exit the cover
  • C — Measurements between the sides of the arch

Measuring Notes

  • See the A/B/C Velcro® slot measurements below to select the proper cover based on the location of the tower slot.
  • If your boat is equipped with a swim platform, you should add this to the overall length of the boat to determine the size cover needed.
  • The cover is made to allow an anchor roller to exit. It will not allow for a bow pulpit to exit, because the bow pulpit usually includes a bow rail, and the slot for the anchor is not large enough. If you have a bow pulpit you should include it in the overall length of the boat so the cover will accommodate for it.

Measuring for a Carver Radar Arch Style Boat Cover

Sun-DURA:100% Solution-Dyed marine grade polyester. 7.6 oz., 600 x 600 Denier. Sun-DURA® colors are part of the polyester fiber itself so the color goes completely through the fiber instead of being just on the surface. 100% Polyurethane finish coating. Excellent UV and mildew resistance. Excellent resistance to fading and rot. Excellent sun blockage. Extremely water repellent. Excellent against cold-cracking. Breathable to help allow interior moisture to escape. (7 Year Limited Warranty)

* Trailerable boat covers must be properly installed and tied down. Additional tie-down kit is recommended for covers 20′ and over. Visit our page for important accessories to keep your cover performing its best.

**Most boat covers will include 12 tie-down straps, however some exceptions will apply to smaller boat covers in which 6 straps will be included instead.

From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Boater's Outlet can get a Styled-to-Fit® boat cover that’s right for you!

Any questions please call Boater's Outlet at (801)568-0858

 

Cover Comes With:

  • 1 – Heavy-Duty Boat Cover Tie Down Kit
  • Easy Installation Instructions

Design Specs

Reviews

(No reviews yet) Write a Review