Product Description
Features
- Fits 21' Yamaha Swim Deck
- Item: C1046
- 35 X 30 X 26
- 725 lbs. total Ballast
- All fittings included W730, 2 x W731, W749
- Works with a W709-SUPA to fill and empty
- Sell Yamaha Bag Rope Guides M1028
- 4 welded on PVC cleats
- The handles are only a guide, if filled and placed properly this will not break and fall off your swim deck.
- The bag must be filled 100% full to the brim so it doesn't move.
- Works best till fill with air first for placement
- If instructions are not followed warranty will be void.
IF BAG IS NOT FILLED 100% WITH WATER, IT WILL FAIL AND FALL OFF THE BACK OF BOAT AND THE WARRANTY WILL BE VOIDED! PLEASE FOLLOW INSTRUCTIONS AND VIDEO QR CODES EXACTLY!
The handles are ONLY a guide for the rope
Must use with a12' or longer rope to properly secure the bag
Rope should be tied tightly around the bag and not putting any pull on the cleats / handles
The bag must be filled 100% full! Partially filling the bag can cause the bag to shift and damage the bag
Fill the bag with air, properly place the bag on the seat and the use the pump to fill with water. Use the air release to bleed out any air and continue to fill with water until the bag is 100% full and there is no air left in the bag.
Not following instructions and installation videos will void warranty!
**Pro Tip – Speed Calibration:** Adding heavy stern ballast changes your boat’s running angle, which often causes factory paddlewheel speedometers (like Yamaha Connext) to read 1–2+ mph off your actual speed. For consistent surf waves, calibrate your speed using a phone GPS app or a GPS-enabled chartplotter. On Yamaha jet boats, the Connext screen will often read 13.4 to 13.7 for optimal wave conditions.